Toplite Foundation aircrete blocks are produced specifically for use below DPC in solid walls. They can be used to support cavity, solid or framed construction and provide a number of benefits for below ground work. They are available in strengths of 3.6N/mm² and 7.3N/mm².
Toplite Foundation working dimensions
Face dimensions are 440mm long x 215mm high.
| Block width (mm) | 275 | 300 |
| Foundation 3.6N/mm² | ||
| Unit weights (kg) | 16.9 | 18.4 |
| Laid weights (kg/m²) | 200 | 218 |
| Foundation 7.3N/mm² | ||
| Unit weights (kg) | 19.6 | 21.3 |
| Laid weights (kg/m²) | 224 | 244 |
Unit and laid weights, which are given for design purposes, are approximate and calculated based on the specified dry density with a 3% moisture content by weight added to provide equilibrium weights. Delivered block weights will be approximately 22% higher.
Toplite Foundation benefits
- Speed of construction - compared to cavity work, construction time is improved and the Foundation wall becomes stable soon after laying, allowing the early start of above ground work.
- Save money - replaces the inner and outer leaf, wall ties and concrete cavity fill associated with conventional cavity walls.
- Excellent performance - good resistance to freeze/thaw conditions and contributes to perimeter edge insulation.
- Suitable for use in sulfate conditions up to DS-3.
Toplite Foundation environmental performance
Toplite Foundation is manufactured under an ISO 14001 compliant Environmental Management System that is independently certified by BSI. Summary green guide ratings applicable to Toplite aircrete blocks can be found in the BRE Green Guide to Specification www.thegreenguide.org.uk.
Toplite Foundation specification
Foundation 3.6N/mm²
- Mean compressive strength: 3.6N/mm²
- Thermal conductivity: 0.15W/mK
- Gross dry density: 630kg/m³
Foundation 7.3N/mm²
- Mean compressive strength: 7.3N/mm²
- Thermal conductivity: 0.19W/mK
- Dry density: 720kg/m³
Toplite Foundation is manufactured to comply with EN 771-4 and conforms to Category 1 manufacturing control as specified in BS 5628-1.
